LK Automation Limited LK Automation Limited
Brand: MITSUBISHI
Go Back >> Product catalogues
MITSUBISHI
Air cover
A1SG60


A1SG60 is an empty cover that is used to plug in the unused I/O slot on the main board or on the extended board. A1SG60 is a reserved dummy module I/O point to PLC extended I/O system.
MITSUBISHI
Terminal row adapter
A1STA32


The use of A1STA32 can significantly reduce the wiring time I/O 32 type of connector assembly, Neither welding, without thread stripping, It only needs to cut a wire and insert the wire into the terminal hole of the A1STA32, A1STA32 in the blade will cut wire insulation surface, To make contact and hold a good conductor.
MITSUBISHI
32: terminal line adapter
A1S-TA32


32: terminal line adapter 0.3mm2 (AGW22).
MITSUBISHI
32: terminal line adapter
A1S-TA32-3


32: terminal line adapter 0.3mm2 (AGW22).
MITSUBISHI
32: terminal line adapter
A1S-TA32-7


32: terminal line adapter 0.75mm2 (AGW18).
MITSUBISHI
32: terminal line adapter
A1S-TB32


The 32 point pressure terminal line adapter to 0.33-0.
MITSUBISHI
Battery
A6BAT


IC-RAM / A7HGP memory CMOS backup battery
MITSUBISHI
External display
A6DU-B


Liquid crystal display: 16 characters x 2 lines, For data access (the state of operation of the central processor, device monitor / change).
MITSUBISHI
Simulation unit
A6SIM-X64Y64


Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried out to control the process of debugging. The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs.
MITSUBISHI
ROM write module
A6WA-28P


Write adapter for EPROM 28 pin
MITSUBISHI
Cable
AC30R4


Cable connection and A7PU/A7HGP/A6GPP CPU, Cable length 3 meters. Provide A7HGP-SET/A6GPP-SET.
   3 Results    Page: 1 2 3 >>