LK Automation Limited
Brand:
MITSUBISHI
Q06UDVCPU | MITSUBISHI General high speed CPU Q06UDVCPU
MITSUBISHI Q06UDVCPU Manual And Instructions
Q06UDVCPU datasheetPDF datasheet
Q06UDVCPU datasheetPDF datasheet
Q06UDVCPU Special InstructionsStrctured Programming Manual
Q06UDVCPU Application FunctionsStrctured Programming Manual
Q06UDVCPU Common InstructionsStrctured Programming Manual
Q06UDVCPU FundamentalsStrctured Programming Manual
Q06UDVCPU Multiple CPU SystemUser's Manual
Q06UDVCPU Function Explanation, Program FundamentalsUser's Manual
Q06UDVCPU Hardware Design, Maintenance and InspectionUser's Manual
Q06UDVCPU Structured TextProgramming Manual
Q06UDVCPU MELSAP-LProgramming Manual
Q06UDVCPU SFCProgramming Manual
Q06UDVCPU PID Control InstructionsProgramming Manual
Q06UDVCPU Common Instructions 1/2Programming Manual
Q06UDVCPU Structured Text(ST)Programming Guide Book
MITSUBISHI Q06UDVCPU Product information and technical parameters：
Brand: MITSUBISHI
Name: General high speed CPU
Model: Q06UDVCPU
Input / output points: 4096 points.
Input / output soft element points: 8192.
Program capacity: 60K step.
Basic operation speed (LD): 1.9ns.
Program memory capacity: 240KB.
Peripheral device connection port: USB, Ethernet (communication support function).
Memory card I/F:SD memory card, extended SRAM card.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming.
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area.
The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,
And to achieve the extension to the file register to all regions of the file register.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),
The speed has been improved.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.
Support USB and RS232.
Support installed memory card.
Providing high speed communication between multiple CPU.
Shorten the fixed scan interrupt time, high precision device.
The minimum interval of the fixed period interrupt program is reduced to 100 s.
The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.
High speed and high precision machine control by multi CPU.
By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control.
Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.
In addition, the latest movement control CPU in performance is 2 times the previous model,
To ensure high speed and high accuracy of the machine control.
...More relevant models >>>>
Q06UDVCPU datasheetPDF datasheet
Q06UDVCPU datasheetPDF datasheet
Q06UDVCPU Special InstructionsStrctured Programming Manual
Q06UDVCPU Application FunctionsStrctured Programming Manual
Q06UDVCPU Common InstructionsStrctured Programming Manual
Q06UDVCPU FundamentalsStrctured Programming Manual
Q06UDVCPU Multiple CPU SystemUser's Manual
Q06UDVCPU Function Explanation, Program FundamentalsUser's Manual
Q06UDVCPU Hardware Design, Maintenance and InspectionUser's Manual
Q06UDVCPU Structured TextProgramming Manual
Q06UDVCPU MELSAP-LProgramming Manual
Q06UDVCPU SFCProgramming Manual
Q06UDVCPU PID Control InstructionsProgramming Manual
Q06UDVCPU Common Instructions 1/2Programming Manual
Q06UDVCPU Structured Text(ST)Programming Guide Book
MITSUBISHI Q06UDVCPU Product information and technical parameters：
Brand: MITSUBISHI
Name: General high speed CPU
Model: Q06UDVCPU
Input / output points: 4096 points.
Input / output soft element points: 8192.
Program capacity: 60K step.
Basic operation speed (LD): 1.9ns.
Program memory capacity: 240KB.
Peripheral device connection port: USB, Ethernet (communication support function).
Memory card I/F:SD memory card, extended SRAM card.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming.
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area.
The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,
And to achieve the extension to the file register to all regions of the file register.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),
The speed has been improved.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.
Support USB and RS232.
Support installed memory card.
Providing high speed communication between multiple CPU.
Shorten the fixed scan interrupt time, high precision device.
The minimum interval of the fixed period interrupt program is reduced to 100 s.
The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.
High speed and high precision machine control by multi CPU.
By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control.
Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.
In addition, the latest movement control CPU in performance is 2 times the previous model,
To ensure high speed and high accuracy of the machine control.
32 point connector for compression connector (37 pin D-sub connector).Input: 4 channels.
Platinum resistance (Pt100; JPt100).
Heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal table x2.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost MITSUBISHI Q06UDVCPU Q06UDVCPU
Heating function at the same time.
The multiple loop can reach the set value at the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs.
Automatic adjustment function.
The PID constant can be adjusted automatically in the control process MITSUBISHI Q06UDVCPU.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module.
Equipment for high temperature control stability of extrusion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling MITSUBISHI Q06UDVCPU.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected. BASIC program execution module.
RS-232.
2 channel.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can bbe improved by reducing the total scan time,
To prevent any possible performance bias Q06UDVCPU.
The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,
Starting from the programmable controller CPU to the second axis servo amplifier,
Time to output speed command of servo amplifier Q06UDVCPU.
This time is the index of data transmission speed between CPU.
Platinum resistance (Pt100; JPt100).
Heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal table x2.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost MITSUBISHI Q06UDVCPU Q06UDVCPU
Heating function at the same time.
The multiple loop can reach the set value at the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs.
Automatic adjustment function.
The PID constant can be adjusted automatically in the control process MITSUBISHI Q06UDVCPU.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module.
Equipment for high temperature control stability of extrusion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling MITSUBISHI Q06UDVCPU.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected. BASIC program execution module.
RS-232.
2 channel.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can bbe improved by reducing the total scan time,
To prevent any possible performance bias Q06UDVCPU.
The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,
Starting from the programmable controller CPU to the second axis servo amplifier,
Time to output speed command of servo amplifier Q06UDVCPU.
This time is the index of data transmission speed between CPU.
...More relevant models >>>>