12 slots.
The main substrate needs to be equipped with CPU and power supply.
Requires 1 power modules.
Used to install Q series modules.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a variety of types of I/O, analog and positioning function module Q1MEM-128S datasheet PDF catalog Q1MEM-128S PDF datasheet Q1MEM-128S
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.
Can also be used in combination with the CPU module to achieve appropriate control.Master station.
Province distribution network module in cabinet and device Q1MEM-128S datasheet PDF catalog Q1MEM-128S PDF datasheet.
Link to connect the 64 stations when the fastest scanning time for 1.2ms (rate 2.5Mbps).
According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.
CC-Link/LT from the station does not need any parameter settings.
Only need to set up the transmission speed in the master module, you can use the remote I/O Q1MEM-128S datasheet PDF catalog Q1MEM-128S PDF datasheet.
QJ61CL12 can be used as the main station of CC-Link/LT."1 axes, SSCNET III type.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
40 pin connector.
Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.
Absolute position system for determining the origin position is supported by the return data set operation.
In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,
Thus greatly reducing the wiring requirements.
Easy to achieve high speed, high precision ppositioning control Q1MEM-128S datasheet PDF catalog Q1MEM-128S PDF datasheet.
Support for multiple types of positioning control,
Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, ppath switching control, constant speed control etc Q1MEM-128S datasheet PDF catalog Q1MEM-128S PDF datasheet. .
In addition, can use the "Configurator-QP GX" and other software,
Easy to set, monitor and debug. "