MITSUBISHI
Modular
A1SG62

MITSUBISHI
Input / output module
A1SH42

Type of input: DC leakage. Input points: 32 points. Input voltage: DC12/24.

MITSUBISHI
Input / output module
A1SH42P

Enter 32 points. 2/5mA DC12/24V. Response time: 10ms.

MITSUBISHI
Input / output module
A1SH42P-S1

Enter 32 points. 5mA DC24V. Response time: 0.

MITSUBISHI
Input / output module
A1SH42-S1

Enter 64 points. Above DC7V. Response time: 16ms.

MITSUBISHI
CPU component
A1SHCPU

I/O control method: refresh mode or direct mode. User program storage capacity: 8K step.

MITSUBISHI
High speed interrupt module
A1SI61

A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.

MITSUBISHI
Main communication module
A1SJ51T64

Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, up to 64 points.

MITSUBISHI
DC input / relay output module
A1SJ-56DR

Input points: 32 points. Input voltage and current: 7mA DC24V. Input response time: 10ms.

MITSUBISHI
DC input / crystal output module
A1SJ-56DT

Input points: 32 points. Input voltage and current: 7mA DC24V. Input response time: 10ms.

MITSUBISHI
CC-Link module
A1SJ61BT11

Three remote components can be connected to the CC-LINK system. Remote I/O: refers to the field components that require only ON/OFF control, Such as digital I/O or pneumatic valve, etc.

MITSUBISHI
CC-Link module
A1SJ61QBT11

CC-Link master / slave station. PLC is the use of " sequential scanning, and constantly circulating " way to work.