LK Automation Limited
Brand:
MITSUBISHI
Q00JCPU-SET | MITSUBISHI Small points with substrate CPU Q00JCPU-SET
MITSUBISHI Q00JCPU-SET Manual And Instructions
Q00JCPU-SET datasheetPDF datasheet
Q00JCPU-SET datasheetPDF datasheet
Q00JCPU-SET Special InstructionsStrctured Programming Manual
Q00JCPU-SET Application FunctionsStrctured Programming Manual
Q00JCPU-SET Common InstructionsStrctured Programming Manual
Q00JCPU-SET FundamentalsStrctured Programming Manual
Q00JCPU-SET Multiple CPU SystemUser's Manual
Q00JCPU-SET Function Explanation, Program FundamentalsUser's Manual
Q00JCPU-SET Hardware Design, Maintenance and InspectionUser's Manual
Q00JCPU-SET Structured TextProgramming Manual
Q00JCPU-SET MELSAP-LProgramming Manual
Q00JCPU-SET SFCProgramming Manual
Q00JCPU-SET PID Control InstructionsProgramming Manual
Q00JCPU-SET Common Instructions 1/2Programming Manual
Q00JCPU-SET Structured Text(ST)Programming Guide Book
MITSUBISHI Q00JCPU-SET Product information and technical parameters：
Brand: MITSUBISHI
Name: Small points with substrate CPU
Model: Q00JCPU-SET
Input / output points: 256 points.
Program capacity: 8 K step.
Processing speed: 0.2 s.
Built in communication port: RS232*1.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
CPU module expansion standard RAM (max 8MB).
Can be used with the SD memory card at the same time.
Continuous access file register.
...More relevant models >>>>
Q00JCPU-SET datasheetPDF datasheet
Q00JCPU-SET datasheetPDF datasheet
Q00JCPU-SET Special InstructionsStrctured Programming Manual
Q00JCPU-SET Application FunctionsStrctured Programming Manual
Q00JCPU-SET Common InstructionsStrctured Programming Manual
Q00JCPU-SET FundamentalsStrctured Programming Manual
Q00JCPU-SET Multiple CPU SystemUser's Manual
Q00JCPU-SET Function Explanation, Program FundamentalsUser's Manual
Q00JCPU-SET Hardware Design, Maintenance and InspectionUser's Manual
Q00JCPU-SET Structured TextProgramming Manual
Q00JCPU-SET MELSAP-LProgramming Manual
Q00JCPU-SET SFCProgramming Manual
Q00JCPU-SET PID Control InstructionsProgramming Manual
Q00JCPU-SET Common Instructions 1/2Programming Manual
Q00JCPU-SET Structured Text(ST)Programming Guide Book
MITSUBISHI Q00JCPU-SET Product information and technical parameters：
Brand: MITSUBISHI
Name: Small points with substrate CPU
Model: Q00JCPU-SET
Input / output points: 256 points.
Program capacity: 8 K step.
Processing speed: 0.2 s.
Built in communication port: RS232*1.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
CPU module expansion standard RAM (max 8MB).
Can be used with the SD memory card at the same time.
Continuous access file register.
4 axis, differential drive output type.
Control unit: pulse.
Location data: 10 data / axis.
Maximum pulse output: 4Mpps.
40 pin connector.
Differential output.
Ideal solution for simple multi axis positioning.
Perfect match with stepper motor control.
Plus deceleration smooth, speed change subtle.
To speed up the speed of positioning control to start processing MITSUBISHI Q00JCPU-SET.
Positioning module Q00JCPU-SET
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control MITSUBISHI Q00JCPU-SET.
(the command pulse of the open collector positioning module is highest 200kpps.)
Reduce system downtime recovery time.
With a simple operation, you can back up all the data in the CPU to the memory card.
Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.
In the event of a CPU failure, after the replacement of CPU, can be a simple operation,
Restore the system by using the data storage card in advance MITSUBISHI Q00JCPU-SET.
Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown. "Maximum control axis: 16 axis.
Connection mode with servo amplifier: IE CC-Link field network connection type.
The maximum distance between the drive units: 100m.
Operation cycle: 0.88ms, 1.77ms, 3.55ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.
Color signal: 4 points.
Color detecting set: 16 set.
Motion control into CC-LinkIE network.
Positioning control, synchronization control and cam control can be easily carried out by the simple parameter setting and the starting of the sequential program.
QD77GF can be used as the main station of CC-LinkIE network.
Communication between 1 network implementation and servo amplifier, field device (remote I/O, sensor, etc.).
Note 1:QD77G only the master station can use the bus shape, star. 1 networks can connect up to 104 units from the device.
Even the long distance wiring can be flexible.
The use of fiber optic cable, with high speed, high performance, high reliability of the servo system controller network.
In addition to the traditional positioning control, but also to support speed / torque control and synchronous control.
Use simple movement module setup tool",
Can easily perform positioning settings, monitoring and debugging, etc..
In addition, the data can be collected and displayed synchroonously with the motion controller Q00JCPU-SET.
Support comprehensive, wiring flexible IE CC-Link field network.
This module can be used as the main station of IE CC-Link field network (equivalent to QJ71GF11-T2),
And still retains the function of ssimple motion module Q00JCPU-SET.
Therefore, flexible connection display (GOT), remote I/O, frequency converter and other equipment, flexible construction system. "
Control unit: pulse.
Location data: 10 data / axis.
Maximum pulse output: 4Mpps.
40 pin connector.
Differential output.
Ideal solution for simple multi axis positioning.
Perfect match with stepper motor control.
Plus deceleration smooth, speed change subtle.
To speed up the speed of positioning control to start processing MITSUBISHI Q00JCPU-SET.
Positioning module Q00JCPU-SET
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control MITSUBISHI Q00JCPU-SET.
(the command pulse of the open collector positioning module is highest 200kpps.)
Reduce system downtime recovery time.
With a simple operation, you can back up all the data in the CPU to the memory card.
Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.
In the event of a CPU failure, after the replacement of CPU, can be a simple operation,
Restore the system by using the data storage card in advance MITSUBISHI Q00JCPU-SET.
Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown. "Maximum control axis: 16 axis.
Connection mode with servo amplifier: IE CC-Link field network connection type.
The maximum distance between the drive units: 100m.
Operation cycle: 0.88ms, 1.77ms, 3.55ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.
Color signal: 4 points.
Color detecting set: 16 set.
Motion control into CC-LinkIE network.
Positioning control, synchronization control and cam control can be easily carried out by the simple parameter setting and the starting of the sequential program.
QD77GF can be used as the main station of CC-LinkIE network.
Communication between 1 network implementation and servo amplifier, field device (remote I/O, sensor, etc.).
Note 1:QD77G only the master station can use the bus shape, star. 1 networks can connect up to 104 units from the device.
Even the long distance wiring can be flexible.
The use of fiber optic cable, with high speed, high performance, high reliability of the servo system controller network.
In addition to the traditional positioning control, but also to support speed / torque control and synchronous control.
Use simple movement module setup tool",
Can easily perform positioning settings, monitoring and debugging, etc..
In addition, the data can be collected and displayed synchroonously with the motion controller Q00JCPU-SET.
Support comprehensive, wiring flexible IE CC-Link field network.
This module can be used as the main station of IE CC-Link field network (equivalent to QJ71GF11-T2),
And still retains the function of ssimple motion module Q00JCPU-SET.
Therefore, flexible connection display (GOT), remote I/O, frequency converter and other equipment, flexible construction system. "
...More relevant models >>>>