LK Automation Limited
Brand:
MITSUBISHI
LY41NT1P-CM | MITSUBISHI Transistor output module (drain type) LY41NT1P-CM
MITSUBISHI LY41NT1P-CM Manual And Instructions
LY41NT1P-CM datasheetPDF datasheet
MITSUBISHI LY41NT1P-CM Product information and technical parameters：
Brand: MITSUBISHI
Name: Transistor output module (drain type)
Model: LY41NT1P-CM
Output points: 32 points.
Output type: leakage type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.1A/1 point.
Protection function: have.
Common way: 32 point / public end.
Input / output occupied points: 32 points (I/O distribution: output 32 points).
External wiring connection mode: 40 pin connector.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called.
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol.
...More relevant models >>>>
LY41NT1P-CM datasheetPDF datasheet
MITSUBISHI LY41NT1P-CM Product information and technical parameters：
Brand: MITSUBISHI
Name: Transistor output module (drain type)
Model: LY41NT1P-CM
Output points: 32 points.
Output type: leakage type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.1A/1 point.
Protection function: have.
Common way: 32 point / public end.
Input / output occupied points: 32 points (I/O distribution: output 32 points).
External wiring connection mode: 40 pin connector.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called.
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol.
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Maximum transmission speed: 115.2kbps.
DC5V internal consumption current: 0.02A.
GOT connection.
MELSOFT connection.
Communication protocol support function serial communication function. Can be used to locate the wiring between drives MITSUBISHI LY41NT1P-CM.
Trunk terminal available for external input signal LY41NT1P-CM "Universal output function: leakage type.
Program capacity: 20K step.
Basic operations processing speed: 60ns.
Communication interface: USB/RS-232.
Control mode: stored procedure repeated operation.
Input / output points: 1024 points.
End cap.
Unable to install display module (L6DSPU-C-CM), RS-232 adapter, RS-422/485 adapter MITSUBISHI LY41NT1P-CM.
CPU built-in functions can be easily set through programming tools.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement MITSUBISHI LY41NT1P-CM.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated ".
High precision PWM control of the highest 200kHz.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators. "Convert connectors to e-CON.The connector is converted to a screw relay terminal.Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use. DC5V internal consumption current: 0.08A.
Weight: 0.12kg.
1 the field input interface module is composed of an optical coupling module and an input interface module of the microcomputer,
Function is the interface of the programmable logic controller and the field control LY41NT1P-CM.
2 the field output interface module is integrated with the output data register, the gating module and the interrupt request module,
Thhe programmable logic controller outputs the corresponding control signal to the execution part of the field through the field output interface module LY41NT1P-CM.
DC5V internal consumption current: 0.02A.
GOT connection.
MELSOFT connection.
Communication protocol support function serial communication function. Can be used to locate the wiring between drives MITSUBISHI LY41NT1P-CM.
Trunk terminal available for external input signal LY41NT1P-CM "Universal output function: leakage type.
Program capacity: 20K step.
Basic operations processing speed: 60ns.
Communication interface: USB/RS-232.
Control mode: stored procedure repeated operation.
Input / output points: 1024 points.
End cap.
Unable to install display module (L6DSPU-C-CM), RS-232 adapter, RS-422/485 adapter MITSUBISHI LY41NT1P-CM.
CPU built-in functions can be easily set through programming tools.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement MITSUBISHI LY41NT1P-CM.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated ".
High precision PWM control of the highest 200kHz.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators. "Convert connectors to e-CON.The connector is converted to a screw relay terminal.Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use. DC5V internal consumption current: 0.08A.
Weight: 0.12kg.
1 the field input interface module is composed of an optical coupling module and an input interface module of the microcomputer,
Function is the interface of the programmable logic controller and the field control LY41NT1P-CM.
2 the field output interface module is integrated with the output data register, the gating module and the interrupt request module,
Thhe programmable logic controller outputs the corresponding control signal to the execution part of the field through the field output interface module LY41NT1P-CM.
...More relevant models >>>>