LK Automation Limited
Brand:
MITSUBISHI
GT2308-VTBD | MITSUBISHI 8.4 Inch Touch Screen GT2308-VTBD
MITSUBISHI GT2308-VTBD Manual And Instructions
GT2308-VTBD datasheetPDF datasheet
GT2308-VTBD MES Interface Function Manual
GT2308-VTBD Microcomputers, MODBUS/Fieldbus Products, PeripheralsConnection Manual
GT2308-VTBD Non-Mitsubishi Products 2Connection Manual
GT2308-VTBD Non-Mitsubishi Products 1Connection Manual
GT2308-VTBD Mitsubishi ProductsConnection Manual
GT2308-VTBD MonitorUser's Manual
GT2308-VTBD UtilityUser's Manual
GT2308-VTBD HardwareUser's Manual
MITSUBISHI GT2308-VTBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT2308-VTBD
Features: high cost of second models.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Support log, one to many connections, FA transparent transmission and other diverse FA machine related functions.
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display.
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.
...More relevant models >>>>
GT2308-VTBD datasheetPDF datasheet
GT2308-VTBD MES Interface Function Manual
GT2308-VTBD Microcomputers, MODBUS/Fieldbus Products, PeripheralsConnection Manual
GT2308-VTBD Non-Mitsubishi Products 2Connection Manual
GT2308-VTBD Non-Mitsubishi Products 1Connection Manual
GT2308-VTBD Mitsubishi ProductsConnection Manual
GT2308-VTBD MonitorUser's Manual
GT2308-VTBD UtilityUser's Manual
GT2308-VTBD HardwareUser's Manual
MITSUBISHI GT2308-VTBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT2308-VTBD
Features: high cost of second models.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Support log, one to many connections, FA transparent transmission and other diverse FA machine related functions.
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display.
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.
With 4.3 inch widescreen.
Applicable model: GT21. Cable length: 3 meters.
For GOT and parallel printer connection. Series Name: small F930GOT.
System screen display language: chinese.
Display: 4.4 inches.
Display color: monochrome (blue / white).
Display device: LCD STN.
Resolution: 240 * 80.
Installation type: panel mounting MITSUBISHI GT2308-VTBD.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch) GT2308-VTBD
Power supply voltage: DC24V.
Touch screen also known as user interface or user interface,
Is a communication interface between human and computer,
Is an important part of the computer system.
Is a medium for interaction and information exchange between the system and the user,
It realizes the transformation between the internal form of information and the acceptable form of human being MITSUBISHI GT2308-VTBD.
Where there is a touch screen to participate in the field of human-computer information exchange. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output.
Applicable model: A985/975/970/A960GOT (-B). 48MB extended memory.
Applicable model: GT15. Protective film for 15 inch screen.
Transparent, 5 MITSUBISHI GT2308-VTBD.
Applicable model: GT16. Cable length: 0.2m.
For bar code reader (D-SUB9 pin, header) and GOT (MINI-DIN6 pin, male head) RS-232 connection between.
Applicable models: GT11, GT21. 15 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must bbe re calibrated to the touch screen system GT2308-VTBD.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT2308-VTBD.
Applicable model: GT21. Cable length: 3 meters.
For GOT and parallel printer connection. Series Name: small F930GOT.
System screen display language: chinese.
Display: 4.4 inches.
Display color: monochrome (blue / white).
Display device: LCD STN.
Resolution: 240 * 80.
Installation type: panel mounting MITSUBISHI GT2308-VTBD.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch) GT2308-VTBD
Power supply voltage: DC24V.
Touch screen also known as user interface or user interface,
Is a communication interface between human and computer,
Is an important part of the computer system.
Is a medium for interaction and information exchange between the system and the user,
It realizes the transformation between the internal form of information and the acceptable form of human being MITSUBISHI GT2308-VTBD.
Where there is a touch screen to participate in the field of human-computer information exchange. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output.
Applicable model: A985/975/970/A960GOT (-B). 48MB extended memory.
Applicable model: GT15. Protective film for 15 inch screen.
Transparent, 5 MITSUBISHI GT2308-VTBD.
Applicable model: GT16. Cable length: 0.2m.
For bar code reader (D-SUB9 pin, header) and GOT (MINI-DIN6 pin, male head) RS-232 connection between.
Applicable models: GT11, GT21. 15 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must bbe re calibrated to the touch screen system GT2308-VTBD.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT2308-VTBD.
...More relevant models >>>>