LK Automation Limited
Brand:
MITSUBISHI
GT1675M-STBA | MITSUBISHI 10.4 inch touch screen GT1675M-STBA
MITSUBISHI GT1675M-STBA Manual And Instructions
GT1675M-STBA datasheetPDF datasheet
GT1675M-STBA User's Manual
GT1675M-STBA MES Interface Function Manual
GT1675M-STBA Gateway Functions Manual
GT1675M-STBA Extended/Option Functions Manual
GT1675M-STBA Mitsubishi plc ConnectionsConnection Manual
GT1675M-STBA Connection Manual
MITSUBISHI GT1675M-STBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 10.4 inch touch screen
Model: GT1675M-STBA
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
...More relevant models >>>>
GT1675M-STBA datasheetPDF datasheet
GT1675M-STBA User's Manual
GT1675M-STBA MES Interface Function Manual
GT1675M-STBA Gateway Functions Manual
GT1675M-STBA Extended/Option Functions Manual
GT1675M-STBA Mitsubishi plc ConnectionsConnection Manual
GT1675M-STBA Connection Manual
MITSUBISHI GT1675M-STBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 10.4 inch touch screen
Model: GT1675M-STBA
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
Cable length: 30m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT10, GT21. Applicable models: GT11, HandyGOTCoaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25 MITSUBISHI GT1675M-STBA. Cable length: 30m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT GT1675M-STBA
Connection between serial communication unit (AJ71QC24-R4) and GOT.
Applicable models: GT10, GT21. Series Name: F940WGOT.
System screen display language: japanese.
Display: 6.7 inch widescreen display.
Display color: 256 color.
Display device: LCD TFF.
Resolution: 480 * 234 MITSUBISHI GT1675M-STBA.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (2ch).
Power supply voltage: DC24V.
GOT-F900 series can be easily applied to a variety of different applications.
3 built-in communication channels.
3 standard communication ports are provided for the same PC (COM2:RS-232C) or a PLC (COM1:RS-232C and COM0:RS-422) communication.
Flexible layout.
F940WGOT can be installed in a vertical or horizontal direction MITSUBISHI GT1675M-STBA.
The direction of the screen can be directed by programming software.
Screen area.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to.
As a result, it is very time-consuming and inefficient to make a similar picture every time. Series Name: F920GOT with buttons, with a series of effective functional modules.
System screen display language: english.
Display: 2.6 inches.
Display color: monochrome (blue / white).
Display device: LCD STN.
Resolution: 128 * 64.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch).
Power supply voltage: DC5V.
The touch screen is the interface between people and machines in the field of information exchange and function contact or interact with each other,
Information exchange, functional contact or mutual influence, the hard contact and soft touch of a person and machine,
This interface includes not only the direct contact point, including long-distance information transmission and control function space.
The mman-machine interface is the central link in the man-machine system,
Mainly from the safety engineering branch of the safety ergonomics to study and put forward the basis for the solution,
And over safety engineering equipment engineeriing,
Safety management engineering and safety systems engineering to study the specific solutions and measures of the safety of human computer science GT1675M-STBA GT1675M-STBA.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT10, GT21. Applicable models: GT11, HandyGOTCoaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25 MITSUBISHI GT1675M-STBA. Cable length: 30m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT GT1675M-STBA
Connection between serial communication unit (AJ71QC24-R4) and GOT.
Applicable models: GT10, GT21. Series Name: F940WGOT.
System screen display language: japanese.
Display: 6.7 inch widescreen display.
Display color: 256 color.
Display device: LCD TFF.
Resolution: 480 * 234 MITSUBISHI GT1675M-STBA.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (2ch).
Power supply voltage: DC24V.
GOT-F900 series can be easily applied to a variety of different applications.
3 built-in communication channels.
3 standard communication ports are provided for the same PC (COM2:RS-232C) or a PLC (COM1:RS-232C and COM0:RS-422) communication.
Flexible layout.
F940WGOT can be installed in a vertical or horizontal direction MITSUBISHI GT1675M-STBA.
The direction of the screen can be directed by programming software.
Screen area.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to.
As a result, it is very time-consuming and inefficient to make a similar picture every time. Series Name: F920GOT with buttons, with a series of effective functional modules.
System screen display language: english.
Display: 2.6 inches.
Display color: monochrome (blue / white).
Display device: LCD STN.
Resolution: 128 * 64.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch).
Power supply voltage: DC5V.
The touch screen is the interface between people and machines in the field of information exchange and function contact or interact with each other,
Information exchange, functional contact or mutual influence, the hard contact and soft touch of a person and machine,
This interface includes not only the direct contact point, including long-distance information transmission and control function space.
The mman-machine interface is the central link in the man-machine system,
Mainly from the safety engineering branch of the safety ergonomics to study and put forward the basis for the solution,
And over safety engineering equipment engineeriing,
Safety management engineering and safety systems engineering to study the specific solutions and measures of the safety of human computer science GT1675M-STBA GT1675M-STBA.
...More relevant models >>>>