LK Automation Limited
Brand:
MITSUBISHI
GT1672-VNBD | MITSUBISHI 10.4 inch touch screen GT1672-VNBD
MITSUBISHI GT1672-VNBD Manual And Instructions
GT1672-VNBD datasheetPDF datasheet
GT1672-VNBD User's Manual
GT1672-VNBD MES Interface Function Manual
GT1672-VNBD Gateway Functions Manual
GT1672-VNBD Extended/Option Functions Manual
GT1672-VNBD Mitsubishi plc ConnectionsConnection Manual
GT1672-VNBD Connection Manual
MITSUBISHI GT1672-VNBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 10.4 inch touch screen
Model: GT1672-VNBD
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
...More relevant models >>>>
GT1672-VNBD datasheetPDF datasheet
GT1672-VNBD User's Manual
GT1672-VNBD MES Interface Function Manual
GT1672-VNBD Gateway Functions Manual
GT1672-VNBD Extended/Option Functions Manual
GT1672-VNBD Mitsubishi plc ConnectionsConnection Manual
GT1672-VNBD Connection Manual
MITSUBISHI GT1672-VNBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 10.4 inch touch screen
Model: GT1672-VNBD
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
Cable length: 1.2 meters.
Long distance CPU extension cable.
For QnA/ACPU/ motion control and GOT connection. Connecting cable for handheld RH GOT and PLC.
Cable length: 6 meters.
Application: RS-422 connection and RS-232C connection. Cable length: 20 meters.
FXCPU GOT.
FXCPU communication function expansion board GOT MITSUBISHI GT1672-VNBD.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)] GT1672-VNBD
Applicable model: GT21. NTSC/PAL output system.
Applicable model: A985GOT-V. For QCPU (Q) / transport controller CPU (Q Series) the bus (1 channel) thin type unit.
Applicable models: GT15, GT16, GT27, GT25. External input / output interface unitProtective film for 10.4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15 MITSUBISHI GT1672-VNBD. Series Name: A975GOT.
Size: 10 inches.
Resolution: 600 * 480.
Display equipment: high brightness TFT color display.
Display color: 16 color.
Power supply: AC100-240V.
Memory card: 1M.
Man machine interface is the interface between man and machine in the field of information exchange and function contact or influence,
Information exchange, functional contact or mutual influence, the hard contact and soft touch of a person and machine,
This interface includes not only the direct contact point line side,
It also includes the function of remote information transmission and control MITSUBISHI GT1672-VNBD.
The man-machine interface is the central link in the man-machine system,
Mainly from the safety engineering branch of the safety ergonomics to study and put forward the basis for the solution,
And over the safety engineering equipment engineering, safety management engineering and safety systems engineering to study the specific solutions and measures to the safety of human computer science and technology.
It realizes the transformation between the innternal form of information and the acceptable form of human being GT1672-VNBD. Cable length: 1.5m.
For the connection between A/QnACPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. Cable llength: 1 GT1672-VNBD. 5m.
For the connection between QCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT.
Long distance CPU extension cable.
For QnA/ACPU/ motion control and GOT connection. Connecting cable for handheld RH GOT and PLC.
Cable length: 6 meters.
Application: RS-422 connection and RS-232C connection. Cable length: 20 meters.
FXCPU GOT.
FXCPU communication function expansion board GOT MITSUBISHI GT1672-VNBD.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)] GT1672-VNBD
Applicable model: GT21. NTSC/PAL output system.
Applicable model: A985GOT-V. For QCPU (Q) / transport controller CPU (Q Series) the bus (1 channel) thin type unit.
Applicable models: GT15, GT16, GT27, GT25. External input / output interface unitProtective film for 10.4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15 MITSUBISHI GT1672-VNBD. Series Name: A975GOT.
Size: 10 inches.
Resolution: 600 * 480.
Display equipment: high brightness TFT color display.
Display color: 16 color.
Power supply: AC100-240V.
Memory card: 1M.
Man machine interface is the interface between man and machine in the field of information exchange and function contact or influence,
Information exchange, functional contact or mutual influence, the hard contact and soft touch of a person and machine,
This interface includes not only the direct contact point line side,
It also includes the function of remote information transmission and control MITSUBISHI GT1672-VNBD.
The man-machine interface is the central link in the man-machine system,
Mainly from the safety engineering branch of the safety ergonomics to study and put forward the basis for the solution,
And over the safety engineering equipment engineering, safety management engineering and safety systems engineering to study the specific solutions and measures to the safety of human computer science and technology.
It realizes the transformation between the innternal form of information and the acceptable form of human being GT1672-VNBD. Cable length: 1.5m.
For the connection between A/QnACPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. Cable llength: 1 GT1672-VNBD. 5m.
For the connection between QCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT.
...More relevant models >>>>