LK Automation Limited
Brand:
MITSUBISHI
FX5-CNV-IFC | MITSUBISHI Connector conversion module FX5-CNV-IFC
MITSUBISHI FX5-CNV-IFC Manual And Instructions
FX5-CNV-IFC datasheetPDF datasheet
MITSUBISHI FX5-CNV-IFC Product information and technical parameters：
Brand: MITSUBISHI
Name: Connector conversion module
Model: FX5-CNV-IFC
Function: connector conversion.
Port converter for connecting FX5 extension devices.
Expansion device for connecting FX5.
...More relevant models >>>>
FX5-CNV-IFC datasheetPDF datasheet
MITSUBISHI FX5-CNV-IFC Product information and technical parameters：
Brand: MITSUBISHI
Name: Connector conversion module
Model: FX5-CNV-IFC
Function: connector conversion.
Port converter for connecting FX5 extension devices.
Expansion device for connecting FX5.
Function extension board for RS-232C communication.
No DC24V consumption, do not take up input and output. Total input and output points: 16 points.
Input points: 16 points.
Output type: DC24V.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect MITSUBISHI FX5-CNV-IFC FX5-CNV-IFC
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Function: no terminal input.
Input points: 16 points MITSUBISHI FX5-CNV-IFC.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
Weight: 0.15KG.
FX2NC expansion module can be directly connected to the FX1NC, FX2NC, PLC FX3UC on the expansion of the input and output.
Do not need to connect the cable and so on, therefore can carry on the compact expansion. Length: 2m.
Specification: MR-C. Function: RS-485 communication.
Adapter for connecting the left extension function of the CPU module MITSUBISHI FX5-CNV-IFC.
CPU module can be connected to the left side up to 6 units. Output: 16 points.
Function: transistor output models (source type).
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can carry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving.
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load. Analog input pooints: 8 channels
Voltage input range: DC-10~10V FX5-CNV-IFC.
Current input range: DC4~20mA, DC-20~20mA.
The resolution of 14 bit binary + symbol 1 bit, 13 bit binary + symbol 1 bit analog input module.
Voltage input, current input, thermocouple temmperature sensor input of the 8 channel can be carried out FX5-CNV-IFC.
The channel can be used as the unit, the mixed use of voltage, current, thermocouple input.
No DC24V consumption, do not take up input and output. Total input and output points: 16 points.
Input points: 16 points.
Output type: DC24V.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect MITSUBISHI FX5-CNV-IFC FX5-CNV-IFC
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Function: no terminal input.
Input points: 16 points MITSUBISHI FX5-CNV-IFC.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
Weight: 0.15KG.
FX2NC expansion module can be directly connected to the FX1NC, FX2NC, PLC FX3UC on the expansion of the input and output.
Do not need to connect the cable and so on, therefore can carry on the compact expansion. Length: 2m.
Specification: MR-C. Function: RS-485 communication.
Adapter for connecting the left extension function of the CPU module MITSUBISHI FX5-CNV-IFC.
CPU module can be connected to the left side up to 6 units. Output: 16 points.
Function: transistor output models (source type).
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can carry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving.
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load. Analog input pooints: 8 channels
Voltage input range: DC-10~10V FX5-CNV-IFC.
Current input range: DC4~20mA, DC-20~20mA.
The resolution of 14 bit binary + symbol 1 bit, 13 bit binary + symbol 1 bit analog input module.
Voltage input, current input, thermocouple temmperature sensor input of the 8 channel can be carried out FX5-CNV-IFC.
The channel can be used as the unit, the mixed use of voltage, current, thermocouple input.
...More relevant models >>>>