LK Automation Limited
Brand:
MITSUBISHI
FX1S-14MT-ES/UL | MITSUBISHI PLC FX1S-14MT-ES/UL
MITSUBISHI FX1S-14MT-ES/UL Manual And Instructions
FX1S-14MT-ES/UL datasheetPDF datasheet
FX1S-14MT-ES/UL PROGRAMMING MANUAL II
FX1S-14MT-ES/UL HARDWARE MANUAL
MITSUBISHI FX1S-14MT-ES/UL Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-14MT-ES/UL
Max input / output points: 14 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 6 points.
Output type: Transistor (source).
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
...More relevant models >>>>
FX1S-14MT-ES/UL datasheetPDF datasheet
FX1S-14MT-ES/UL PROGRAMMING MANUAL II
FX1S-14MT-ES/UL HARDWARE MANUAL
MITSUBISHI FX1S-14MT-ES/UL Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-14MT-ES/UL
Max input / output points: 14 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 6 points.
Output type: Transistor (source).
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
Function: terminal row input.
Input points: 16 points.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
Weight: 0.15KG.
FX2NC expansion module can be directly connected to the FX1NC, FX2NC, PLC FX3UC on the expansion of the input and output.
Do not need to connect the cable and so on, therefore can carry on the compact expansion MITSUBISHI FX1S-14MT-ES/UL. Max input / output points: 32 points FX1S-14MT-ES/UL
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 16 points.
Output type: relay.
Power consumption: 25W.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time MITSUBISHI FX1S-14MT-ES/UL.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications MITSUBISHI FX1S-14MT-ES/UL.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
Thhe basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type) FX1S-14MT-ES/UL.
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, evenn if the cable is then replaced by the cable FX1S-14MT-ES/UL. Function extension board for RS-485 communication.
No DC24V consumption, do not take up input and output.
Input points: 16 points.
Connected programmable logic controller: FX1NC, FX2NC, FX3UC.
Weight: 0.15KG.
FX2NC expansion module can be directly connected to the FX1NC, FX2NC, PLC FX3UC on the expansion of the input and output.
Do not need to connect the cable and so on, therefore can carry on the compact expansion MITSUBISHI FX1S-14MT-ES/UL. Max input / output points: 32 points FX1S-14MT-ES/UL
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 16 points.
Output type: relay.
Power consumption: 25W.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time MITSUBISHI FX1S-14MT-ES/UL.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications MITSUBISHI FX1S-14MT-ES/UL.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
Thhe basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type) FX1S-14MT-ES/UL.
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, evenn if the cable is then replaced by the cable FX1S-14MT-ES/UL. Function extension board for RS-485 communication.
No DC24V consumption, do not take up input and output.
...More relevant models >>>>