LK Automation Limited
Brand:
MITSUBISHI
FX-16E-150CAB-R | MITSUBISHI Input output cable for terminal module FX-16E-150CAB-R
MITSUBISHI FX-16E-150CAB-R Product information and technical parameters：
Brand: MITSUBISHI
Name: Input output cable for terminal module
Model: FX-16E-150CAB-R
20 pin connector on both ends of the circular multi-core cable.
Length 1.5M.
Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting MITSUBISHI FX-16E-150CAB-R FX-16E-150CAB-R
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINK/LT master function organically combined together to achieve a superior price.
FX3UC basic single built in the network with the power 0.35A.
For the less number of remote I/O, there is no external power adapter, can also be connected to the MITSUBISHI FX-16E-150CAB-R.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total up to 256 points can be controlled. High speed output adapter (FX3U- - racy -BD)Memory format: RAM.
Number of steps: up to 16000 steps can be used.
Battery support: required.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device MITSUBISHI FX-16E-150CAB-R. Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N throough the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication FX-16E-150CAB-R.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, thhe output points are less than 14 FX-16E-150CAB-R.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting MITSUBISHI FX-16E-150CAB-R FX-16E-150CAB-R
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINK/LT master function organically combined together to achieve a superior price.
FX3UC basic single built in the network with the power 0.35A.
For the less number of remote I/O, there is no external power adapter, can also be connected to the MITSUBISHI FX-16E-150CAB-R.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total up to 256 points can be controlled. High speed output adapter (FX3U- - racy -BD)Memory format: RAM.
Number of steps: up to 16000 steps can be used.
Battery support: required.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device MITSUBISHI FX-16E-150CAB-R. Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N throough the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication FX-16E-150CAB-R.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, thhe output points are less than 14 FX-16E-150CAB-R.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
...More relevant models >>>>