LK Automation Limited
Brand:
MITSUBISHI
A953GOT-SBD | MITSUBISHI 6 inch man machine interface A953GOT-SBD
MITSUBISHI A953GOT-SBD Manual And Instructions
A953GOT-SBD datasheetPDF datasheet
A953GOT-SBD HardwareUser's Manual
A953GOT-SBD HardwareUser's Manual
A953GOT-SBD Introductory ManualOperating Manual
A953GOT-SBD Connection System ManualUser's Manual
A953GOT-SBD SW4D5C-GOTR-PACKE compatible Connection System ManualUser's Manual
A953GOT-SBD Extended/Option Functions ManualOperating Manual
A953GOT-SBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions ManualOperating Manual
MITSUBISHI A953GOT-SBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 6 inch man machine interface
Model: A953GOT-SBD
Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN color display.
Display color: 8 color.
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 1M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects.
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose.
...More relevant models >>>>
A953GOT-SBD datasheetPDF datasheet
A953GOT-SBD HardwareUser's Manual
A953GOT-SBD HardwareUser's Manual
A953GOT-SBD Introductory ManualOperating Manual
A953GOT-SBD Connection System ManualUser's Manual
A953GOT-SBD SW4D5C-GOTR-PACKE compatible Connection System ManualUser's Manual
A953GOT-SBD Extended/Option Functions ManualOperating Manual
A953GOT-SBD SW4D5C-GOTR-PACKE compatible Extended/Option Functions ManualOperating Manual
MITSUBISHI A953GOT-SBD Product information and technical parameters：
Brand: MITSUBISHI
Name: 6 inch man machine interface
Model: A953GOT-SBD
Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN color display.
Display color: 8 color.
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 1M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects.
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose.
MELSECNET/10.
Inter-PC fiber loop. Support for 15 inch.
Applicable models: GT16, GT15. Cable length: 3m.
Connection between a connector adapter box and a smart GOT.
Applicable model: HandyGOT. Cable length: 20m.
For QnA/ACPU/ motion controller CPU (A Series) /FXCPU. Connection between (D-SUB25 pin connector) and GOT MITSUBISHI A953GOT-SBD.
For the connection between FA-CNV*CBL and GOT.
Connector for serial communication unit and GOT A953GOT-SBD
For the connection between AJ65BT-G4-S3 and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Connecting cable for handheld GOT and PLC.
Cable length: 3 meters.
Application: RS-422 connection MITSUBISHI A953GOT-SBD. Cable length: 10 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21. QCPU (Q mode) bus connection.
2 joint.
Applicable models: A985 (-V) /975/970/960GOT MITSUBISHI A953GOT-SBD. Cable length: 20 meters.
PC to GOT long distance connection cable.
For connection between GOT and GOT. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output.
Applicable model: A985/975/970/A960GOT (-B). For analog RGB input 2CH (1ch individual display).
Applicable model: GT27. Cable length: 30m.
Connection between serial communication unit and GOT.
Connection between a computer link unit and a GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. 5.7 inches.
Applicable model: GT27. Protective film for 8.4 inch screen.
Transparent, 5.
Applicable model: GT12. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must bbe re calibrated to the touch screen system A953GOT-SBD.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A953GOT-SBD.
Inter-PC fiber loop. Support for 15 inch.
Applicable models: GT16, GT15. Cable length: 3m.
Connection between a connector adapter box and a smart GOT.
Applicable model: HandyGOT. Cable length: 20m.
For QnA/ACPU/ motion controller CPU (A Series) /FXCPU. Connection between (D-SUB25 pin connector) and GOT MITSUBISHI A953GOT-SBD.
For the connection between FA-CNV*CBL and GOT.
Connector for serial communication unit and GOT A953GOT-SBD
For the connection between AJ65BT-G4-S3 and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Protective film for 12.1 inch screen.
Scrub, 5.
Applicable model: GT15. Connecting cable for handheld GOT and PLC.
Cable length: 3 meters.
Application: RS-422 connection MITSUBISHI A953GOT-SBD. Cable length: 10 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21. QCPU (Q mode) bus connection.
2 joint.
Applicable models: A985 (-V) /975/970/960GOT MITSUBISHI A953GOT-SBD. Cable length: 20 meters.
PC to GOT long distance connection cable.
For connection between GOT and GOT. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output.
Applicable model: A985/975/970/A960GOT (-B). For analog RGB input 2CH (1ch individual display).
Applicable model: GT27. Cable length: 30m.
Connection between serial communication unit and GOT.
Connection between a computer link unit and a GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. 5.7 inches.
Applicable model: GT27. Protective film for 8.4 inch screen.
Transparent, 5.
Applicable model: GT12. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must bbe re calibrated to the touch screen system A953GOT-SBD.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A953GOT-SBD.
...More relevant models >>>>