LK Automation Limited
Brand Sort:
MITSUBISHI
MR-JCCBL35M-H Market price | MR-JCCBL35M-H Introduction
- Brand: MITSUBISHI
- Country: JAPAN
- Name:
- Model: MR-JCCBL35M-H
- Price: 0 >
MITSUBISHI MR-JCCBL35M-H
Motor series: super low inertia, medium power.
Rated output power: 1.0kw.
Rated speed: 3000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP65 (IP67).
Features: ultra low inertia is suitable for high frequency operation.
Application example: ultra high frequency transmission machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed MR-JCCBL35M-H
All motor dimensions are the same as before and all are compatible with the wiring.
Cable length: 20 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21. MELSECNET/B.
Twisted pair bus. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.4kw.
Interface type: SSCNET type III fiber communication.
Power specification: single phase AC100V.
High speed serial communication between the SSCNET and the servo amplifier by using the fastest up to 0.44ms communication cycle,
A fully synchronous control system can be constructed.
It is only necessary to insert the special optical fiber into the joint to form SSCNET III network, which greatly reduces the wiring work and reduces the possibility of false wiring.
Due to the adoption of the optical fiber communication, the anti noise ability can be greatly improved and the long distance wiring of 50 meters (maximum 800 meters x 16 axes) can be realized.
A servo amplifier to meet the full closed loop control function MR-J3-B-RJ006.
Suitable for mechanical servo optimization and adjustment!
More advanced optimization adjustment function and control function to maximize mechanical properties. Cable length: 1.0M. Used in MR-J2S-700B (4) or lessApplicable model: A956WGOT.Cable length 10m; used in A6TE2-16SRN.
MR-JCCBL35M-H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-JCCBL35M-H&select=5
Rated output power: 1.0kw.
Rated speed: 3000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP65 (IP67).
Features: ultra low inertia is suitable for high frequency operation.
Application example: ultra high frequency transmission machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed MR-JCCBL35M-H
All motor dimensions are the same as before and all are compatible with the wiring.
Cable length: 20 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21. MELSECNET/B.
Twisted pair bus. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.4kw.
Interface type: SSCNET type III fiber communication.
Power specification: single phase AC100V.
High speed serial communication between the SSCNET and the servo amplifier by using the fastest up to 0.44ms communication cycle,
A fully synchronous control system can be constructed.
It is only necessary to insert the special optical fiber into the joint to form SSCNET III network, which greatly reduces the wiring work and reduces the possibility of false wiring.
Due to the adoption of the optical fiber communication, the anti noise ability can be greatly improved and the long distance wiring of 50 meters (maximum 800 meters x 16 axes) can be realized.
A servo amplifier to meet the full closed loop control function MR-J3-B-RJ006.
Suitable for mechanical servo optimization and adjustment!
More advanced optimization adjustment function and control function to maximize mechanical properties. Cable length: 1.0M. Used in MR-J2S-700B (4) or lessApplicable model: A956WGOT.Cable length 10m; used in A6TE2-16SRN.
MR-JCCBL35M-H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-JCCBL35M-H&select=5
...more relevant model market price >>>>
Related products
MITSUBISHI
Encoder cable
MR-JCCBL5M-H
Cale length: 5m.
For MR-J2S-700A 4 /C
MITSUBISHI
Encoder cable
MR-JCCBL2M-H
Cale length: 2m.
For MR-J2S-700A 4 /C
MITSUBISHI
Encoder cable
MR-JCCBL10M-L
Cale length: 10m.
For MR-J2S-700A 4 /
MITSUBISHI
Encoder cable
MR-JCCBL30M-H
Cale length: 30m.
For MR-J2S-700A 4 /