MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.6kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller MELSEC-L SERIES Application Functions Manual MELSEC-L SERIES Programming Manual MELSEC-L SERIES
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication.
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data MELSEC-L SERIES Application Functions Manual MELSEC-L SERIES Programming Manual. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient MELSEC-L SERIES Application Functions Manual MELSEC-L SERIES Programming Manual.
The servo amplifier can be used for speed control operation.
When the two stations are occupied, the speed can be set directly by the remote register. Type: MR-J series.
Rated output: 0.2KW.
Suitable for motor series: HA-ME.
Voltage: single phase AC100V.
It is very helpful to improve the stability of the low speed control of the servo motor.
But there is no direct effect to improve the accuracy of position control.
There are, of course, software compensation that is similar to pitch compensation,
Can improve the physical resolution of the single lap, so as to improve the accuracy of positioning control.
This can be effectively used in the use of the robot control of the indexing table.
It is also because of the appliccation of splicing technology,
The rotary encoder will be more widely used in the high precision servo control in the harsh environment MELSEC-L SERIES Application Functions Manual MELSEC-L SERIES Programming Manual.
The use of rotary encoder with 224/ in the servo motor has been used in the servo motor MELSEC-L SERIES Application Functions Manual MELSEC-L SERIES Programming Manual.
Encoder serial communication system, the communication frequency can only be limited to 10M.