Extending the device for FX1, PLC FX2, on PLC FX2N.
Need to use the conversion cable. MITSUBISHI inverter series: FR-A820.
Voltage level: three phase 200V.
Power: 1.5kw.
SLD converter rated current: 10.5A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
Parameters can be selected by 4 different rated current and different overload rating (SLD (ultra light load) rated, LD (light load) rating, ND (general load) rating, HD (weight) FX1S-10MR-ES/UL Manual FX1S-10MR-ES/UL HARDWARE MANUAL FX1S-10MR-ES/UL
Type load) for selection.
You can choose the most suitable frequency converter for use; and by selecting a transducer with a SLD or LD rated level,
Be able to reduce the size of the device (compared with the FR-A700 series, to reduce the volume of equipment) FX1S-10MR-ES/UL Manual FX1S-10MR-ES/UL HARDWARE MANUAL.
For applications that require high torque at low speeds, the HD rating is the most suitable.
The controller is used to control and monitor the frequency converter through the network.
Standard corresponding RS-485 communication (MITSUBISHI converter protocol, Modbus-RTU protocol) data transmission speed up to 115200bps. Power: 15kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control FX1S-10MR-ES/UL Manual FX1S-10MR-ES/UL HARDWARE MANUAL.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving. Memory format: EEPROM.
Number of steps: up to 16000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. Dissplay and setting data in a programmable controller FX1S-10MR-ES/UL Manual FX1S-10MR-ES/UL HARDWARE MANUAL.
Can monitor or set the timer, counter, data register.
Half the 16 characters *4, full width of 8 characters, Japanese *4 (JIS first, second)), English digital FX1S-10MR-ES/UL Manual FX1S-10MR-ES/UL HARDWARE MANUAL. Output expansion board (transistor output 2 points).Cable length: 1m.
RS-485 terminal unit conversion unit.
Applicable model: GT16.