5 slots; requires 1 AnS series PLC power modules;
Used to install large AnS series PLC module.
Base plate of AnS series PLC.
QA1S series PLC 5 slot main substrate.
AnS series of modules can be installed. RS232 cable for connecting cables and 3M, CPU.SRAM+E2PROM memory card.
RAM capacity: 128KB.
E2PROM capacity: 128KB Q24DHCCPU-V Communication Protocal Manual Q24DHCCPU-V Reference Manual. Input and output points: 1024 points Q24DHCCPU-V
Input / output data points: 8192 points.
Program capacity: 60k.
Basic command processing speed (LD command) S:0.2.
PLC in the program execution stage: according to the order of the user program order to store the order of each instruction,
After the corresponding operation and processing, the result is written to the output status register,
The contents of the output status register are changed with the execution of the program Q24DHCCPU-V Communication Protocal Manual Q24DHCCPU-V Reference Manual.
Output refresh phase: when all instructions are executed,
The output status register is sent to the output latch in the output refresh stage,
And through a certain way (relay, transistor or transistor) output, drive the corresponding output equipment. Cable length 3 meters.
Extended substrate for connection Q24DHCCPU-V Communication Protocal Manual Q24DHCCPU-V Reference Manual. Control axis: up to 16 axes.
Interpolation function: linear interpolation (maximum 4 axis), arc interpolation (2 axis), spiral interpolation (3 axis).
PLC capacity: 60K step.
Can control the maximum 16 axis servo amplifier.
With the position control, speed control, torque control, advanced synchronous control and other rich control methods.
The incremental synchronous encoder I/F and the symbol detection signal I/F are integrated in the 1 modules.
Capacity expansion can be expanded to PLC capacity 60K step (using Q170MSCPU-S1), the 7 layer of the substrate.
Combined with the servo amplifier to achieve safe torque off (STO).
Connect directly to the visual system produced by Ethernet through the COGNEX connection.
Connection SSCNET III /H main module LJ72MS15 can use the MELSEC-L series of input.
Output module, analog input and output module, high speed counter module.Input: 4 channels.
Platinum resistance (Pt100; JPt100).
No heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal station.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module.
Equipment for high temperature control stability of extrusion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost.
Heating function at the same time.
The multiple loop can reach the set value att the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs Q24DHCCPU-V Communication Protocal Manual Q24DHCCPU-V Reference Manual.
Automatic adjustment function.
The PID constant can be adjusted automatically in the control process Q24DHCCPU-V Communication Protocal Manual Q24DHCCPU-V Reference Manual.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.