Relay output: 32.
Rated current and voltage: DC24V/AC240V, 2A/1 point, 5A/1 public end, 8 point 1 Public end.
External wiring connections: 38 terminals (terminals sold separately).
Replacement model: AY13.Input / output points: 4096 points.
Number of input and output elements: 8192.
Program capacity: 30 K step Q00UJCPU-S8 PID Control Instructions Manual Q00UJCPU-S8 Programming Manual .
Processing speed: 34ns Q00UJCPU-S8
Program memory capacity: 144 KB.
Built in RS232 communication port.
Support installed memory card.
For A mode only.
Enhance the basic performance.
CPU''s built-in soft element memory capacity increases to up to 60K.
To increase the control, quality management data can also be processed at high speed.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming Q00UJCPU-S8 PID Control Instructions Manual Q00UJCPU-S8 Programming Manual .
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area Q00UJCPU-S8 PID Control Instructions Manual Q00UJCPU-S8 Programming Manual .
The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,
And to achieve the extension to the file register to all regions of the file register.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),
The speed has been improved.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.8 axes.
Connect SSCNET III.
Control unit: pulse.
Location data: 32 data / axis.
Ideal solution for simple multi axis positioning.
A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.
Thee multi axis system is most suitable for simple positioning control Q00UJCPU-S8 PID Control Instructions Manual Q00UJCPU-S8 Programming Manual .
Ideal selection for high speed linear positioning control in multi axis system.
Linear interpolation opeeration with up to 4 axes can be carried out Q00UJCPU-S8 PID Control Instructions Manual Q00UJCPU-S8 Programming Manual .
With the electronic gear, gap compensation, absolute position system, such as basic positioning function.