Power: 75kw.
Voltage: 200V.
Sine wave filter.
The voltage and current of the motor can be adjusted to a sine wave.
The sine wave filter is installed to the output terminal of the inverter.
Applicable to FR-A820-03800 (75K) above and FR-A840-02160 (75K) and above frequency converter.
Sine wave filter is equivalent to the operational characteristics of the sine wave power driver, can provide the following benefits MR-J2-20A Manual MR-J2-20A Communication Function Operating Installation Guide MR-J2-20A
Low noise.
No surge current.
Reduce motor loss (standard motor). MR-J2M multi axis servo amplifier.
Interface type: compatible with SSCNET high speed serial bus.
The servo control system is a kind of operating system which can automatically control the mechanical movement of the test device according to the predetermined requirements MR-J2-20A Manual MR-J2-20A Communication Function Operating Installation Guide.
In many cases, refers to the servo system is to control the amount of (the system output) is a feedback control system of mechanical displacement or displacement velocity and acceleration,
Its function is to make the output of the mechanical displacement (or rotation angle) to accurately track the input displacement (or rotation angle).
The structural composition of the servo system and other forms of feedback control systems are not distinguished in principle MR-J2-20A Manual MR-J2-20A Communication Function Operating Installation Guide. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
Rated output: 11.0kw.
SSCNET interface.
Voltage: 3 phase AC400V.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0.888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to form a SSCNET system.
This simple connection method reduces the routing time and helps to prevent noise.

Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit MR-J2-20A Manual MR-J2-20A Communication Function Operating Installation Guide.
It is only necessary to add a battery on the seervo amplifier, which can form the absolute value system MR-J2-20A Manual MR-J2-20A Communication Function Operating Installation Guide.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use.