Type: HF-SN servo motor, medium inertia power.
Rated output power: 0.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) Manual HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC)
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) Manual HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) .
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of the servo amplifier, which is convenient for cable connection HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) Manual HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) .
The gain adjustment can be easily carried out by the real-time automatic tuning function. Servo motor series: low inertia, small capacity.
Rated output: 2.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Oil seal: have.
Corresponding servo amplifier: MR-JE-10B/MR-JE-10A.
Support position control, speed control, torque control, push and press control.
Position control can use linear, arc interpolation controller, fixed size feed control, target position change and other rich functions.
The position control and torque control are realized by switching control mode.
The gain adjustment of servo can be simply performed by the advanced one key tuning funcction HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) Manual HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) .
At the same time, it is also able to suppress the low frequency vibration of the manipulator by the advvanced vibration suppression control II,
Shorten the time to complete the positioning, so as to achieve the production of the rhythm of the shortening HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) Manual HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC) .