Cable length: 25m.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. Cable length: 3m.
For printer and GOT (print unit) between the connection, HandyGOT, GT10, GT27, GT25, GT23, GT21 GT2710-VTWD-GF Utility Manual GT2710-VTWD-GF User's Manual. Used to prevent accidental shutdown switch GT2710-VTWD-GF
Applicable model: hand held GOT. Cable length: 30 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21 GT2710-VTWD-GF Utility Manual GT2710-VTWD-GF User's Manual. Protective film for 15 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. Protective film for 8.4 inch screen.
Transparent (frame: white), 5.
Applicable model: GT16. 10.4 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. 12.1 inches.
Applicable models: GT27, GT25 GT2710-VTWD-GF Utility Manual GT2710-VTWD-GF User's Manual. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In oorder to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT2710-VTWD-GF Utility Manual GT2710-VTWD-GF User's Manual GT2710-VTWD-GF Utility Manual GT2710-VTWD-GF User's Manual.