For the GT1685M-STB.
Applicable model: GT16. Cable length: 1.2m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color GT2103-PMBDS2 Non-Mitsubishi Products 2 Manual GT2103-PMBDS2 Connection Manual GT2103-PMBDS2
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port GT2103-PMBDS2 Non-Mitsubishi Products 2 Manual GT2103-PMBDS2 Connection Manual.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2103-PMBDS2 Non-Mitsubishi Products 2 Manual GT2103-PMBDS2 Connection Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. Cable length: 10m.
Connection between serial communication unit and GOT.
Connection between a computer link unit and a GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Cable length: 0.7m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Cable length: 2.5m.
For mottion controller CPU (A series, the main base system) and the connection between A7GT-CNB GT2103-PMBDS2 Non-Mitsubishi Products 2 Manual GT2103-PMBDS2 Connection Manual.
Applicable models: GT16, GT15, GT11. Cable length: 30m.
For long distance conneections between QCPU and GOT (above 13 GT2103-PMBDS2 Non-Mitsubishi Products 2 Manual GT2103-PMBDS2 Connection Manual. 2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25.