A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422 GT1155-QSBD-C Manual GT1155-QSBD-C Extended/Option Functions Manual GT1155-QSBD-C
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT1155-QSBD-C Manual GT1155-QSBD-C Extended/Option Functions Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1155-QSBD-C Manual GT1155-QSBD-C Extended/Option Functions Manual. 512MB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOTCable length: 5m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. Cable length: 5.0m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. With 4.3 inch widescreen.
Applicable model: GT21. Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15. Protective film for 10.4 inch screen.
Scrub, 5.
AApplicable model: GT16 GT1155-QSBD-C Manual GT1155-QSBD-C Extended/Option Functions Manual. Cable length: 1m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication funnction extension board (MINI-DIN8 pin connector) and GOT GT1155-QSBD-C Manual GT1155-QSBD-C Extended/Option Functions Manual.
The unit can not be used with FX1NC, FX2NC, FX3UC-D/DSS, FX3G.
Applicable models: GT10, GT21.