Can be used to locate the wiring between drives.
Trunk terminal available for external input signal. MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 90KW.
Frequency converter is the application of frequency conversion technology and micro electronics technology, by changing the motor operating power frequency mode to control the AC motor power control equipment FX3U-80MT/ESS MODBUS Serial Communication Edition Manual FX3U-80MT/ESS USER'S MANUAL FX3U-80MT/ESS
The converter is composed of rectifier (AC), filter, inverter (DC), braking unit, driving unit, micro processing unit of the detection unit.
Inverter by the internal IGBT to adjust the output power supply voltage and frequency,
According to the actual needs of the motor to provide the required power supply voltage, and then achieve the purpose of energy saving, speed control, in addition to the,
Inverter has a lot of protection functions, such as over current, over voltage, overload protection and so on FX3U-80MT/ESS MODBUS Serial Communication Edition Manual FX3U-80MT/ESS USER'S MANUAL. Input / output type: DC input (drain / source).
Input and output points: 16 points.
DC5V internal consumption current: 100mA.
DC24V internal consumption current: 85mA.
In order to extend the input output of the device FX3U-80MT/ESS MODBUS Serial Communication Edition Manual FX3U-80MT/ESS USER'S MANUAL.
Also has a built-in power supply products.
The maximum number of points for the input and output is 256.
Expansion module: up to 16 units (in addition to the power expansion module)
The total number of CC-Link, AnyWireASLINK, and Bitty series of remote I/O is 512 points. Max input / output points: 64 points.
Power supply voltage: 24VDC.
Input points: 32 points.
Output points: 32 points.
Output type: relay.
Power consumption: 35W.
Weight (kg):1.0.
Size (WxHxD) mm:220x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program.
Clock functtion and hour meter function, all of the PLC FX2N has a real-time clock standard FX3U-80MT/ESS MODBUS Serial Communication Edition Manual FX3U-80MT/ESS USER'S MANUAL.
Continuous scanning function, to define the operation cycle for the application off the continuous scan time FX3U-80MT/ESS MODBUS Serial Communication Edition Manual FX3U-80MT/ESS USER'S MANUAL.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).