Cable length: 1.5 meters.
For FXCPU (FX0, FX0S, FX0N, FX1S, FX1N, FX2N, FX2NC,) and GOT connection.
For FXCPU expansion board FX2N-422-B, FX1N-422-BD and GOT connection. Input and output points: 14 points.
Power supply: AC100-240V.
Input points: 8 points.
Output points: 6 points.
Output form: transistor output (drain) FX3U-48MR/DS MODBUS Serial Communication Edition Manual FX3U-48MR/DS USER'S MANUAL FX3U-48MR/DS
Power consumption: 19W.
Weight: 0.3KG.
Outline dimension: 60x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control FX3U-48MR/DS MODBUS Serial Communication Edition Manual FX3U-48MR/DS USER'S MANUAL.
Compact but powerful,
At the same time, the analog quantity and communication function, etc.. Can be used as a screw relay terminal.Power: 1.5kw.
Voltage: 200V.
Purpose: high frequency braking resistor.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor.
Can also be connected without built-in brake transistor inverter FX3U-48MR/DS MODBUS Serial Communication Edition Manual FX3U-48MR/DS USER'S MANUAL.
Three types of discharge resistors are available.
Please select according to the required braking torque. Power: 22kw.
Purpose: to suppress the power harmonics.
Connected to the inverter input, can be used to improve the power factor, reduce the input side of the high harmonic current.
According to the motor power used to select AC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Parameter setting can be carried out without the power supply of the inverter.Length: 3.0m.
Specification: TB-FX round cable. MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 11KW.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%).
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and elecctrical FX3U-48MR/DS MODBUS Serial Communication Edition Manual FX3U-48MR/DS USER'S MANUAL.
The inverter drive can be smoothly start (start time longer).
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120%% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load FX3U-48MR/DS MODBUS Serial Communication Edition Manual FX3U-48MR/DS USER'S MANUAL.