Power: 0.75kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor FX3U-128MT/ESS Manual FX3U-128MT/ESS HARDWARE MANUAL. (the IP55 series has a built-in DC reactor FX3U-128MT/ESS)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) 5 in each package.
Application: to protect the surface of the display, to prevent the operation of oil or other material pollution.
The contaminated part of the adhesive film can be replaced FX3U-128MT/ESS Manual FX3U-128MT/ESS HARDWARE MANUAL.
Specifications: 120*45mm.
Application Series: F930GOT. Purpose: to operate, monitor, and change the parameters through the network.
Applicable frequency converter: FR-A700, FR-F700, FR-E700. Function extension board for RS-422 communication.
DC5V power consumption: 20mA. Memory format: EEPROM.
Number of steps: up to 8000 steps can be used.
Battery support: do not FX3U-128MT/ESS Manual FX3U-128MT/ESS HARDWARE MANUAL.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. Power: 55kw.
Voltage: 200V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function. Built in analog input models.
Input / output points: 30 points.
Power supply: AC100-240V.
Input points: 16 points.
Output points: 14 points.
Output form: transistor output (drain).
Power consumption: 21W.
Weight: 0.45KG.
Outline dimension: 100x90x49mm.
Built in CPU, power supply, input and output.
Keep FX1S compact body, while adding more features.
Special adaptor and function expansion board can be installed and used FX3 series.
High speed operation.
Basic instructions: 0.21 s/ instruction
Application instruction: 0.5 s/ instruction
Large capacity memory.
Built in program memory 4000 steps.
No battery.
Auxiliary relay: 1536 points.
Timer: 138 points.
Counter: 67.
Data register: 3000.
A new application model.
FX3SA is a basic model on the basis of the basicc performance of the FX1S increased the expansion of the new models FX3U-128MT/ESS Manual FX3U-128MT/ESS HARDWARE MANUAL.
FX3SA is suitable for all kinds of fields, such as analog quantity, Ethernet, MODBUS function, small scale equipment and so onn FX3U-128MT/ESS Manual FX3U-128MT/ESS HARDWARE MANUAL.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and the communication function and so on.