MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 110KW.
When the ring is opened, the frequency converter is provided with a load of the motor when the motor is operated with a load at a given frequency,
The range of the motor speed in the rated slip ratio (1%~5%) changes FX3G-40MR/ES-A MODBUS Serial Communication Edition Manual FX3G-40MR/ES-A USER'S MANUAL FX3G-40MR/ES-A
For the requirements of relatively high precision, even if the load changes are also required to operate at a given speed of the occasion,
Inverter with PG feedback function can be used (selection).
If the given acceleration time is too short, the output frequency of the inverter is far more than the change of the speed (electric angular frequency),
Converter will be due to flow over the current trip, the operation stopped, which is called stall FX3G-40MR/ES-A MODBUS Serial Communication Edition Manual FX3G-40MR/ES-A USER'S MANUAL. Input points: 16 points.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: European terminal.
Weight: 0.15kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models FX3G-40MR/ES-A MODBUS Serial Communication Edition Manual FX3G-40MR/ES-A USER'S MANUAL.
FX2NC-16E_-T-DS for terminal units can be disassembled models. Memory type: EEPROM.
Protection switch: have.
Program transfer function.
EEPROM memory can be connected to FX3SA, FX3GA, FX3GE do not need a battery backup and with the program transfer function.
Protective switch with incidental write protection,
Program transfer function between built-in PLC and memory box.
When the memory box is installed on the PLC host, the program in the memory box is preferred.
The memory box can be installed on the function expansion board and FX3S-CNV-ADP, FX3G-CNV-ADP. Master station module for CC-Link/LT.
I/O control can be used in the province of CC-LINK/LT.
Is to make PLC CC-LINK/LT as the main station of the FX system module.
The master station module and the remote I/O module can be connected by a special connector, and achieve the purpose of the distribution of the province.
Up to 64 remote I/O stationn modules can be connected FX3G-40MR/ES-A MODBUS Serial Communication Edition Manual FX3G-40MR/ES-A USER'S MANUAL.
Remote I/O module is assigned a common X, Y soft components,
By using the same procedure as the common input and output.
Even if the uuse of 2 points, 4 points of the remote I/O module, the number of soft components can be continuously assigned,
So it can be efficiently allocated I/O FX3G-40MR/ES-A MODBUS Serial Communication Edition Manual FX3G-40MR/ES-A USER'S MANUAL.