Power: 30kw.
Voltage: 400V.
Purpose: high frequency braking resistor.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor.
Can also be connected without built-in brake transistor inverter.
Three types of discharge resistors are available FX1S-14MT-DSS Manual FX1S-14MT-DSS PROGRAMMING MANUAL II.
Please select according to the required braking torque FX1S-14MT-DSS MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 315KW.
Frequency converter is the application of frequency conversion technology and micro electronics technology, by changing the motor operating power frequency mode to control the AC motor power control equipment.
The converter is composed of rectifier (AC), filter, inverter (DC), braking unit, driving unit, micro processing unit of the detection unit FX1S-14MT-DSS Manual FX1S-14MT-DSS PROGRAMMING MANUAL II.
Inverter by the internal IGBT to adjust the output power supply voltage and frequency,
According to the actual needs of the motor to provide the required power supply voltage, and then achieve the purpose of energy saving, speed control, in addition to the,
Inverter has a lot of protection functions, such as over current, over voltage, overload protection and so on FX1S-14MT-DSS Manual FX1S-14MT-DSS PROGRAMMING MANUAL II. Series Name: hand held F940GOT.
System screen display language: english.
Display: 5.7 inches, can operate in the palm of the GOT.
Display color: 8 color.
Display device: LCD STN.
Resolution: 320 * 240.
Installation type: panel mounting.
The built-in communication port: RS-232C (1ch).
Power supply voltage: DC24V.
GOT-F900 series can be easily applied to a variety of different applications.
3 built-in communication channels.
Screen area.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to.
As a result, it is very time-consuming and inefficient to make a similar picture every time. Power: 30kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can correespond to the continuous regeneration operation of the pipeline control FX1S-14MT-DSS Manual FX1S-14MT-DSS PROGRAMMING MANUAL II.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space annd reduce the comprehensive cost FX1S-14MT-DSS Manual FX1S-14MT-DSS PROGRAMMING MANUAL II.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving.