The built-in I/O function (Location: 1 axis) of the pulse output is converted to a differential drive output.Power: 37kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost FX-485PC-IF Manual FX-485PC-IF Hardware Manual FX-485PC-IF
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving. Input / output form: relay output.
Output points: 8 points.
Input and output points: 8 points.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure FX-485PC-IF Manual FX-485PC-IF Hardware Manual.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensitivity adjustment unit can reach 1ms.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of control axis FX-485PC-IF Manual FX-485PC-IF Hardware Manual.
Extended function expansion board and special adapter,
Data links and communication with external serial devices.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Function: bus convert FX5 to FX3.
Input and output points: 8 points.
Conversion module connecting FX3 series expansion module.
FX3 series eexpansion module, only the right side of the bus conversion module can be connected FX-485PC-IF Manual FX-485PC-IF Hardware Manual. Length: 1.5m.
Specification: FX round connector. Memory format: EEPROM.
Number of steps: up to 16000 steps can be ussed FX-485PC-IF Manual FX-485PC-IF Hardware Manual.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device.