Convert connector to screw relay terminal.
The action of the signal of the conversion module is shown in the light of the lamp.
Negative common end with display. MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 355KW.
Frequency converter is the application of frequency conversion technology and micro electronics technology, by changing the motor operating power frequency mode to control the AC motor power control equipment FR-A7NC-EKIT Manual FR-A7NC-EKIT TECHNICAL MANUAL FR-A7NC-EKIT
The converter is composed of rectifier (AC), filter, inverter (DC), braking unit, driving unit, micro processing unit of the detection unit.
Inverter by the internal IGBT to adjust the output power supply voltage and frequency,
According to the actual needs of the motor to provide the required power supply voltage, and then achieve the purpose of energy saving, speed control, in addition to the,
Inverter has a lot of protection functions, such as over current, over voltage, overload protection and so on FR-A7NC-EKIT Manual FR-A7NC-EKIT TECHNICAL MANUAL. MITSUBISHI inverter series: FR-A800.
Voltage level: three phase 400V.
Power: 55kw.
SLD converter rated current: 180A FR-A7NC-EKIT Manual FR-A7NC-EKIT TECHNICAL MANUAL.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
Mirror like ultra fine processing.
In order to adapt to the new material diversification, the machine adopts the most cutting-edge technology, more than ever more slim hard.
In order to be able to realize the fine cutting, grinding on the hard and hard material,
The need for high-speed operation has become more and more strong.
In order to cope with the increasing demand of logistics, every port in the world has a crane in every day.
A container filled with cargo.
We can achieve a new type of inverter products under the conditions of low speed and high torque to achieve smooth cargo handling operations,
Carry on the smooth movement to the heavy. Cable length: 2m.
RS-485 terminal unit conversion unit.
Applicable model: GT16. A 20 pin connector is installed on one side of the loose line.
Length 5M. MITSUBISHI inverter FR-D720S series.
Voltage level: single phase 200V.
Frequency converter capacity: 0.2KW.
VVVF frequency control, vector control frequency conversion, direct torque control is a kind of AC - DC - AC frequency conversion.
The common drawback is that the input power factor is low, the harmonic current is big, and the DC circuit needs large energy storage capacity,
Renewable energy and can not be fed back to the power grid, which can not be carried out in the four quadrant operation. To this end, the matrix type of AC - AC variable frequency arises at the historic moment.
Because the matrix type alternating current frequency saves the intermediate DC link, thereby, the electrolytic capacitor with large volume and high price can be omitted.
It can achieve a powwer factor of L, the input current is sinusoidal and can run in four quadrant, the power density of the system is large FR-A7NC-EKIT Manual FR-A7NC-EKIT TECHNICAL MANUAL.
Although the technology is not yet mature, but still attract a large number of scholars in-depth study FR-A7NC-EKIT Manual FR-A7NC-EKIT TECHNICAL MANUAL.
In fact, the quality is not the indirect control current, flux, but the torque is directly used as the control to achieve.