Length: 15 meters.
Cable manufacturing specifications.
When there is no connection options, according to the table under the cable.
Using a parallel connection or a large size cable for connection between the terminal PG" and "SD" and the motor end encoder. "Power: 280kw.
Voltage: 400V.
Purpose: high frequency braking resistor FR-A740-55K-CHT Manual FR-A740-55K-CHT TECHNICAL MANUAL.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor FR-A740-55K-CHT
Can also be connected without built-in brake transistor inverter.
Three types of discharge resistors are available.
Please select according to the required braking torque. MITSUBISHI inverter series: FR-A800.
Voltage level: three phase 400V.
Power: 90kw FR-A740-55K-CHT Manual FR-A740-55K-CHT TECHNICAL MANUAL.
SLD converter rated current: 260A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
Mirror like ultra fine processing.
In order to adapt to the new material diversification, the machine adopts the most cutting-edge technology, more than ever more slim hard.
In order to be able to realize the fine cutting, grinding on the hard and hard material,
The need for high-speed operation has become more and more strong FR-A740-55K-CHT Manual FR-A740-55K-CHT TECHNICAL MANUAL.
In order to cope with the increasing demand of logistics, every port in the world has a crane in every day.
A container filled with cargo.
We can achieve a new type of inverter products under the conditions of low speed and high torque to achieve smooth cargo handling operations,
Carry on the smooth movement to the heavy. Power: 55kw.
Voltage: 200V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving. Power: 22kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity FR-A740-55K-CHT Manual FR-A740-55K-CHT TECHNICAL MANUAL.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motorr power used to select the DC reactor FR-A740-55K-CHT Manual FR-A740-55K-CHT TECHNICAL MANUAL.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.)