Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use. Power: 280kw.
Voltage: 400V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode F920GOT-BBD5-K-E Manual F920GOT-BBD5-K-E Installation Manual.
Equipped with standard power retrogradation function F920GOT-BBD5-K-E The operation, monitoring, parameter modification and other operations can be carried out by computer or PLC.MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 15.0kw.
SLD converter rated current: 31.0A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
2 times the power consumption of the wind turbine and pump and the speed of the 3 power consumption is proportional to the speed of the rotating speed F920GOT-BBD5-K-E Manual F920GOT-BBD5-K-E Installation Manual.
Through the speed control of the frequency converter to adjust the air flow, can reduce the power consumption.
Give full play to the performance of the motor.
The excitation current is always adjusted to the best state, which can improve the efficiency of the motor F920GOT-BBD5-K-E Manual F920GOT-BBD5-K-E Installation Manual.
Load torque is smaller, can further improve energy efficiency.
For example, when a general motor is used, the optimal excitation control mode in the 4% motor load torque is about 30% more than that of the V/F control. Converts the built-in I/O function to the screw terminal."Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: Transistor (source).
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x75.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S seriess PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 F920GOT-BBD5-K-E Manual F920GOT-BBD5-K-E Installation Manual.
FX1S provides up to 30 I/O points, and cann be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment F920GOT-BBD5-K-E Manual F920GOT-BBD5-K-E Installation Manual. "